Powerfix POAS 2 A1 - Manual (Page 5)

3 POAS 2 A1
■ GB
■ The supplied wallplugs are only suitable for inser-
tion into a concrete or stone wall. It is absolutely
important that you check the suitability of your ma-
sonry before inserting the wallplugs. If you do not,
the wallplugs may not hold and the wall panels
could fall off . If in doubt, consult a professional.
Technical data
Maximum load per wall panel 32 kg
Maximum load - small box 1 kg
Maximum load - medium box 1.5 kg
Maximum load - large box 2 kg
Items supplied
Before taking the item into use, check that all of the
parts are complete/available and free of visible
damage. If the items supplied are not complete, or
damaged due to defective packaging or through
transportation, contact Customer Services (see chap-
ter “Importer/Service”).
▯ 2 x Wall panels (42 x 59 cm)
▯ 14 x Boxes small (red) (11.5 x 10 x 7.3 cm)
▯ 2 x Boxes small (blue) (11.5 x 10 x 7.3 cm)
▯ 8 x Boxes medium (blue) (16.5 x 10 x 7.3 cm)
▯ 4 x Boxes large (yellow) (21.5 x 10 x 7.3 cm)
▯ 10 x Hooks (5 cm)
▯ 1 x Drill and bit holder (16.5 x 5 cm)
▯ 1 x Tool holder (21 x 9.5 cm)
▯ 1 x Ring and open-ended spanner holder
(21.8 x 6.8 cm)
▯ 40 x Screws M5 x 30
▯ 40 x Wallplugs S6
▯ This information sheet
Assembly
Installing the wall panels
▯ Draw a straight line on the wall so as to align the
wall panels with it (see Fig. 1).
▯ Hold the wall panels against the wall and, using
a pointed object, mark the boreholes through the
screw positions.
IB_55737_POAS2A1_LB4.indb 3 IB_55737_POAS2A1_LB4.indb 3 04.11.13 11:09 04.11.13 11:09