Everex eXplora - Manual (Page 19)

System Recovery
13
Setting up an Internet Connection
All eXplora computers come equipped with a 56k modem for dial-up
Internet access and a 10/100 Ethernet LAN port for simplified
connection to a external broadband modem.
Connecting to the Internet involves 3 separate steps.
1. Physically connecting your hardware and communication devices.
2. Subscribing to an Internet Service Provider (ISP) to allow
communication from your computer to the Internet (additional
charges may apply).
3. Configuring the Internet Browser software on your computer to
access the Internet.
Connecting your hardware
To establish dial-up Internet access, connect the supplied telephone
line (RJ11) between a working telephone jack and the LINE jack on the
back of the computer. (figure 5.1) If desired, a standard telephone can
be connected to the Phone jack on the back of the computer.
Hint: When the Dial-up Internet connection is in use, the telephone line
can not be used simultaneously.
Figure 5.1