Powerfix PMTR 4 A1 - Manual (Page 11)

- 8 -
Introduction
Congratulations!
With your purchase you have decided in favour of
a quality product. Familiarise yourself with the pro-
duct before taking it into use. To do this, read the
following operating instructions attentively. Use the
product only as described and only for the speci-
fied areas of application. Retain these instructions
for future reference. In addition, pass these docu-
ments on, together with the product, to any future
owner.
Safety notices
Risks of Injury!
• You must wear safety shoes to avoid injuries
caused by tipping loads.
• Serious injuries caused by the tipping of loads
are possible. Ensure that the load to be shunted
cannot tip over. Arrange for a second person to
assist. Only move the load slowly.
• Injuries are possible through the uncontrolled
lowering of loads. Always lower loads under
control.
• Use the lever arm and the four roller bases only
if they are in a faultless condition.
• Do not extend/lengthen the lever arm.
• Ensure that all doors and drawers that the piece
of furniture might have are secured against
unintentional opening before shunting it.
• Ensure that there are no obstacles in the way on
the shunting route.
• Only use the furniture transport set on level
surfaces.
• Place the roller bases under the furniture so that
the roller-wheels are all facing in the same
direction.
• Do not permit children or people requiring
guidance to handle the furniture transport set
without supervision. They may not be able to
correctly assess the potential dangers.
Property Damage!
• Remove the contents from furniture pieces before
lifting and shunting them.
• Incorrect placing of the lever arm may cause
damage to furniture. Always slide the swivel
head of the lever arm under the furniture to the
stop plate.
• Place the four roller bases below the extreme
corners of the furniture piece. The furniture piece
should sit completely on the four roller bases.
• Shunt larger furniture pieces with assistance from
a second person.
• Ensure that there are no obstacles in the way on
the shunting route.
• Only use the furniture transport set on level
surfaces.
Intended purpose
The furniture transport set is only suitable for
shunting furniture over short distances.
The furniture transport set is NOT intended for
commercial employment.
The manufacturer accepts no liability for damage
resulting from improper or false usage of the device.
Description
With the help of the furniture transport set you can
lift pieces of furniture and place them on the roller
bases.
Subsequently, you can shunt the furniture over short
distances with a minimum of effort.
Items supplied
Immediately after unpacking check to ensure that all
components are available and that there are no
signs of visible damage to the furniture transport set:
• 1 Lever arm with swivelling head
• 4 transport rollers with rotatable loading
surfaces
• Operating Instructions
GB/MT
IB_94483_PMTR4A1_LB5 03.01.2014 13:45 Uhr Seite 8