Powerfix PEK 2.3 A1 - Manual (Page 19)

PowerFix PEK 2.3 A1
English - 17
Storage when not in use
If you will not be using the endoscope camera for an extended
period of time, remove the batteries to avoid leakage.
Keep the clean, dry endoscope camera and accessories in the
supplied hard shell case (B) in a cool, dry place.
Troubleshooting
The device cannot be switched on
1. Batteries may be empty, replace the batteries.
2. Check whether the batteries are inserted correctly.
No image in the display/distorted images
Check the connection between the gooseneck and hand unit. Remove the
gooseneck and then attach it again as described in the section
"Attaching/detaching the gooseneck".
Distorted images on an external screen, for example, TVs
Check that the cable is connected. You may have to use a different or
better cable.
Cleaning
Clean the device with a dry cloth if soiled, and use a slightly damp cloth to
remove stubborn dirt. Make sure that no major pressure is exerted when
cleaning the display to avoid damaging it. Do not use any solvents, corrosive
or gaseous cleaning agents. Ensure that no moisture penetrates the control
panel.
Environmental and disposal information
When this symbol appears on a product, this indicates that the
product is subject to the European Directive 2012/19/EU. All
electrical and electronic devices must be disposed of separately
from household waste at designated disposal points.