Nubia N1 (NX541J) - Manual (Page 19)

18
Scan other devices and pair with them
1. On the home screen, select " Settings " > " Bluetooth ".
2. Touch the switch to turn on Bluetooth.
3. Your phone shall automatically scan the nearby Bluetooth devices. Select one device.
4. Touch " Pair " to pair with two devices. Or input the Bluetooth password and then touch " OK ".
After the paring request is accepted by other device or the same password is entered, the pairing is
completed.
5. After paired, these two devices can communicate within short distance.
Send data via Bluetooth
You can send music, sound recordings, videos, calendar events, contacts, etc. via Bluetooth. The
operation process depends on what you send.
Below is an example of sending an image via the Bluetooth.
1. On the home screen, touch " Gallery ".
2. Open the image you want to send.
3. Select " Share " > " Bluetooth ". Your phone shall turn on Bluetooth automatically and start to search
nearby Bluetooth devices.
4. Select paired device or select one device from the scanning list to pair and send the file.
Receive data via Bluetooth
1. Turn on Bluetooth and set "Visible to all nearby Bluetooth devices".
2. Show the notification panel, touch the Bluetooth share notification and touch " Accept " to receive the
file.
3. After the file is received, the phone shall display the notification. If you want to view the file, show the
notification panel and touch the relevant notification.
Back to Contents