Hotpoint Ariston HB 0705 AX0 - Manual (Page 15)

15
it en
Pull the two fasteners towards the outside to fit the
lid onto the bowl, making sure the lid arrow is aligned
with the bowl arrow.
The fasteners must be locked in the two clip
positions, otherwise during operating the
bowl lid may rotate as the motor rotates.
3. Insert the bottom part of the motor unit into the
opening on the bowl lid, and turn it clockwise to
lock.
4. Plug the appliance into the power outlet.
5. Put the food inside the feeding tube and push it
slowly with the food pusher. Do not push heavily.
6. Rotate the speed-adjusting dial to select the
desired speed. Pressing and holding the ON/
OFF button, the attachment starts chopping
immediately. For maximum speed press the
TURBO button for a short time.
Never introduce very hard foods (e.g. hard
chocolate), ice or frozen foods when using
shredding or slicing attachments.
TIPS
• Use the shredding side for carrots, potatoes and
foods of a similar texture.
• Use the slicing side for food items such as
carrots, potatoes, cabbages, cucumbers,
courgettes and onions.
• Use fresh ingredients.
• Do not cut food too small. Fill the feed tube
uniformly. This prevents the food from pouring
out during processing.
STORAGE SYSTEM (F)
When not in use, the detachable stem, whisk and
motor unit can be stored on the bowl lid.
When placing the discs inside the bowl for
storage, make sure the cutting edges do not
scratch the bowl walls.
CLEANING AND MAINTENANCE
To prevent any damage to the appliance do
not use harsh solvents or abrasive cleansers
when cleaning.
Unplug the appliance from the power supply before
cleaning.
1. Wash the blender attachments and lids under
running water without any abrasive cleaners or
detergents. After cleaning, place them upright so
that any water that may have got in can drain
out.
Do not immerse the blender and lids in water,
as the lubrication on the bearings may be
washed away over time.
2. Wash the containers and whisk in warm soapy
water. All removable parts can be washed in
warm soapy water and then carefully rinsed and
dried. If necessary, use a nylon-bristle brush to
complete the cup cleaning operation.
3. Wipe the motor unit with a damp cloth. Never
immerse it in water for cleaning purposes, as
electric shocks may occur.
4. The non-slip base on the bottom of the bowl can
be removed and cleaned. Make sure it is re-
placed correctly before using it again.
5. Dry all detachable parts thoroughly.
TIP
For quick cleaning between processing tasks, fill
the cup or bowl with water halfway, assemble the
hand-held blender according to the description in the
operation section and start the blending / chopping
function for a few seconds.
DISPOSAL OF OLD
ELECTRICAL APPLIANCES
The European Directive 2002/96/EC on Wa-
ste Electrical and Electronic Equipment
(WEEE), requires that old household electri-
cal appliances must not be disposed of in
the normal unsorted municipal waste stre-
am.
Old appliances must be collected separately
in order to optimise the recovery and
recycling of the materials they contain and reduce the
impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose
of the appliance it must be separately collected. Con-
sumers should contact their local authority or retailer
for information concerning the correct disposal of their
old appliance.