R& 76 – Epson Stylus Office TX600FW User Manual

Page 76

Advertising
background image



Error Messages

Solution

Paper jam. Open the scanner unit and remove the jammed
paper. Then close the scanner unit and press x. See your
documentation.

R

& 84

Paper is jammed in the printer. Turn off the printer,
open the scanner unit, and remove the paper. See your
documentation.

R

& 85

A printer error has occurred. Turn off the printer and turn it
on again. Please see your documentation.

Turn the printer off and then back on. Make sure that no paper is still in
the printer. If the error message still appears, contact your dealer.

A scanner error has occurred. See your documentation.

Turn the printer off and then back on. If the error message still appears,
contact your dealer.

The printer’s ink pads are nearing the end of their service
life. Contact Epson Support.

Contact Epson support to replace ink pads before the end of their
service life. When the ink pads are saturated, the printer stops and
Epson support is required to continue printing.

The printer’s ink pads are at the end of their service life.
Please contact Epson Support.

Contact Epson support to replace ink pads.

The data is too complex to print with Bluetooth.

See the documentation for the device transmitting the data.

Error in the data. The document cannot be printed.

See the documentation for the device transmitting the data. (Cause:
The data is not available because of a malfunction in the device.)

Error in the data. The document may not be printed
correctly.

See the documentation for the device transmitting the data. (Cause: A
part of the data is corrupted or cannot be buffered.)

Cannot recognize the device.

Make sure the storage disk has been inserted correctly.

Cannot recognize the memory card or disk.

Make sure the memory card or storage disk has been inserted correctly.
If so, check to see if there is a problem with the card or disk and try
again.

Backup Error.
Error Code xxxxxxxx

A problem occurred and backup was canceled. Make a note of the
error code and contact your dealer.

The combination of IP address and subnet mask is invalid.
See your documentation.

Refer the online User’s Guide - Networking.

Error Messages
Messages d’erreur
Fehlermeldungen
Foutmeldingen

EN

EN

R

& 76

FR

DE

NL

R

& 79

R

& 78

R

& 77

Advertising
This manual is related to the following products: