Epson AcuLaser MX20DNF - Manual (Page 15)

EPSON Code39 Num EPSON Code39 CD Num
EPSON Code128
❏ Code128 fonts support code sets A, B, and C. When the code set of a line of characters is changed in
the middle of the line, a conversion code is automatically inserted.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in
conformance to the Code128 standard. For this reason, it is important to keep at least one space
between the bar code and the surrounding text to prevent overlapping.
❏ Some applications automatically delete the spaces at the end of lines or change multiple spaces into
tabs. Bar codes containing spaces may not be correctly printed from applications that
automatically delete spaces from the ends of lines or change multiple spaces into tabs.
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or select a font
other than a BarCode Font and input the space. If a space is input while Code128 is selected, the
bar code will not be correct.
Character type All ASCII characters (95 in total)
Number of characters No limit
Font size 26 pt to 104 pt (up to 96 pt in Windows 7/Vista/XP/2000/Server 2008/Server 2003).
Recommended sizes are 26 pt, 52 pt, 78 pt, and 104 pt.
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Start/Stop character
❏ Check digit
❏ Change code set character
Print sample
Epson Font Guide
Working with Fonts 15