Appendix, Communication specification – Epson EMP-X56 User Manual

Page 24

Advertising
background image

ESC/VP21 Command User's Guide for Business Projectors

24 of 25

9.Appendix

9.1.Communication specification.

A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending
commands to the projector.

Serial Connection (600/800/810/811/820,30/52,73/53/74/54,8300/9300,7800/7850,S1/S1H,61/81,830/835/821,828/7900/
7950,62/82,6100/6000,1815/1810/1825,83/822/83+/822+,280,6110/6010,400W,G5350/G5300/G5150/G5100/G5200W/G5000)

• Select RS-232C at Advanced Setting of the Menu.
• Communication condition
Baud rate

: 9600 bps

Data length

: 8 bits

Parity

: No

Stop bit

: 1 bit

Flow control

: No

• Connector

: D-sub 9pin

• Projector input

: Control(RS-232C)

*DTR and DSR are not used.

USB Connection (600/800/810/811/820,720/730/520,73/53/74/54,735,8300/9300,7800/7850/61/81,830/835,740/745/732/
737,821/828,7900/7950,S3/S4,765/760,755/750,62/82/X3(76),1715/1710/1705/1700,S5/X5/EX90,260,G5350/G5150/S6/X6/
W6,1735W/1730W/1725/1720)

• For 600/800/810/811/820, select USB at Advanced Setting of the Menu.
• For 730/720/520/735/740/745/732/737/S3/765/760/755/750/X3(76)/S4/1715/1710/1705/1700/S5/X5/260,select Link 21L at
Advanced Setting of the Menu.
• For 8300/8350/9300,select USB at Advanced2 Setting of the Menu.
• For 61/81/830/835/821,select USB at Extended Setting of the Menu.
• For S6/X6/W6/1735W/1730W/1725/1720,select Wireless Mouse and select Link 21Lat Extended Setting of the Menu.
• Epson USB COM Driver has to be installed in your computer to use USB for communication. A COM port is added to your
computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT)
in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).

• Connector

: USB(B type)

Projector

PC serial cable

Computer

GND

5

5

GND

RD

2

3

TD

TD

3

2

RD

Signal name

Function

GND

Common ground

TD

Transmitted data

RD

Received data

USB COM Driver

Models

EMPUSBSetup.exe

600/800/810/811/820/720/730/520/73/53/74/54/735

EMPUSB2Setup.exe

7800/7850/8300/9300/61/81/830/835/740/745/732/737/

821/828/7900/7950/S3/765/760/755/750/62/82/X3(76)S4/

1715/1710/1705/1700/S5/X5/EX90/260/S6/X6/W6/1735W/

1730W/1725/1720

<Projector>

<Computer>

<Projector>

<Computer>

Advertising
This manual is related to the following products: