MCZ Ego AIR - Manual (Page 40)

PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL page 40
Operation Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
4.8.
HOT AIR VENTILATION
The Star and Ego stove are equipped with an internal fan for expulsion
of heating air. It can be set to 5 different speeds at any time regardless
of the whether the stove is in manual or automatic mode.
5 speeds can be selected as well as an automatic function.
To select the speed, after pressing the bottom right button, press it
again to increase or decrease the fan power.
In addition to 5th speed there is an additional selection called AUTO
function. This function lets you connect the fan speed to the flame
power. With this option selected, the stove will independently select the
fan speed based on the flame power.
This option can be simply selected by always pressing the bottom right
key, scrolling through the various speeds 1-2-3-4-5. On the control
panel the letter A will appear.
Example with ventilation set to AUTO:
If the flame is at power 3, the fan will automatically set to speed 3. If
the flame is at power 5, the fan will automatically set to speed 5, and
so on.
If the keypad of the control panel is inactive for 10
seconds the remote control automatically leaves the
fan adjustment mode and does not confirm the last
setting inserted.
In selecting the fan speed, it is advisable not to
select very low speeds (1st or 2nd) when the stove is
at maximum power as this may cause the structure
to overheat.