Operating – EXPANSYS PANSAT 4500 User Manual
Page 14
2009 by Panarex Electronics
2. OPERATING
1. Start Up
If you are watching TV through the RF-cable, you need to adjust the Channel number. The type of TV and Channel
numbers are set to NTSC and Channel 3 at the factory.
Please follow the brief procedure below and watch the satellite programs.
1) Select the User Setup and confirm Language
2) Select the Installation and antenna setup
3) Adjust LNB configuration per each satellite
4) Execute scanning to find program
5) Exit from installation after all programs are searched.
1.1 Language
When the receiver is turned on for the first time, main menu is appeared as below photo.
You can find desired menu by using ▲ ▼ key and select desired menu by press [OK] key.
Select the user setup and press [OK] or to enter Language menu as below photo and can select the desired
language by using or [OK] key to confirm it.
* This Receiver supports 10 languages.
English, French, German, Italian, Spanish, Portuguese, Russian, Turkish, Polish and Arabic
2. Installation
Press the [OK] or key to enter Installation menu as below photo and use common password “0000”. Parental
control and channel edit are not accessible until satellite channel scanned and saved. Press the [OK] key on Antenna
setup menu and it is appeared on screen as below second photo.