MCZ Degas User Manual
Page 7
INSTALLATION AND USE MANUAL
Chapter 3
DEGAS
page
7
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.2. PHASE 1 - POSITIONING OF FIREPLACE STOVE FORMA PURO65
Place the Forma Puro in the desired position and at a safe distance from the rear wall. Raise the
Fireplace stove of desired height, provided it is greater than150 mm (= width of Degas frame). A second
adjustment of the unit (minor variations), if necessary, is made during assembly of the cladding.
N.B. It is necessary to create a support base upon which to fasten the Forma Puro65. The unit must
be firm and stable on the floor.
BASE APPOGGIO
FORMA PURO
DI SICUREZZA
DISTANZA
>150 MM
PAVIMENTO
PROFILO
COPRIBORDO
Install the unit Forma Puro65 in accordance with the instructions in the respective
Manual for Installation and
Use and run a quick test for proper operation. If the test is successful, you can install the Degas cladding.