Electrolux LAVAMAT 1610 - Manual (Page 21)

21
Washing cycle complete/Removing the washing
At the end of the programme PLEASE TAKE OUT THE CLOTHES appears
in the display. As soon as the
§ symbol appears, the door can be
opened.
1. Open the door using the handle.
2. Remove the washing.
3. Switch off the appliance.
If Rinse Hold has been selected:
1. Press the START key.
The display automatically
changes to the first pro-
gramme page. Depending
upon the programme that
has been running either SPIN
or SHORT SPIN is highlight-
ed.
If spinning or draining is required:
Use the control knob to
highlight either
– SPIN or
– DRAIN.
2. Reduce the spin speed, if
necessary.
3. Press the START key.
The washing is spun or the water is drained.
3
If OVERDOSING is shown in the display at the end of a wash cycle, too
much detergent was used in the completed wash programme. Please
take note of the dosage instructions provided by the detergent manu-
facturer and the amount of washing loaded the next time you wash.
DELICATES 30°C
RINSE HOLD 11:28-11:28
§
START
RINSE HOLD
######################
RINSE H.
SHORT SPIN
1200 RPM 12:28-12:34
ú
START
EASY IRON
REFRESH
1200
FASHION
SHORT SPIN)
OPTIONS SPIN
SPIN
1200 RPM 11:28-11:39
ú
START
FASHION
SHORT SPIN
1200 SPIN)
STARCH
OPTIONS DRAIN