Assembly of matisse cladding, Table of screws, Preparation of wall – MCZ Matisse User Manual
Page 6
Advertising
INSTALLATION AND USE MANUAL
Chapter 3
MATISSE
page
6
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3. ASSEMBLY OF MATISSE CLADDING
3.1. TABLE OF SCREWS
VITE AUTOPERFORANTE 4.2x16
RULLINO AGGANCIO
DADO FLANGIATO M5
VITE M4x10 UNI 7689
VITE M5x10 DIN 6921
N°6
N°5
N°4
N°19
N°6
N°2
VITE M5x8 ISO 7380
VITE M3x16 UNI 5931
VITE CARTONGESSO 3.9x35
N°2
N°10
3.2. PREPARATION OF WALL
136
1255
1350
453
29
20
You will need to make an opening in the wall of 1350x1255mm and position the fireplace stove at a distance on
the right from the edge of the wall and the Forma Puro75 of 453mm, a height from the floor to the fire bed of
136mm and at the rear from the wall to the lower part of the unit of 29mm.
Advertising