Marshall Electronics OR-XDI - Manual (Page 3)

OR-XDI Operation Manual
Marshall Electronics
Page 6 of 8
Supported Formats
Input Formats Supported:

480i60,575i50

480p60*,576p50*

720p60,50,30,25,24

1080i60,50

1080p60,50,30,25,24
* For HDMI input only
Output Formats Supported:

480i60, 575i50

480p60*,576p50*

720p60,50,30,25,24

1080i60,50

1080p60,50,30,25,24
* For HDMI output only
* Converted to 480i60, 575i50 for SDI output
Audio Formats Supported:

48KHz PCM Audio up to 8 channels from HDMI or embedded SDI
Physical Specifications

Power : 5.5vDC~16vDC

Power consumption : 3W (typ)

Weight : 216g

Dimension (mm) : 58 x 100 x 35

USB Field upgradable thru One Click update.

Case : Alloy
Battery Options
Model Description Voltage
OR-XDI-CM Cross Convertor modules with Canon batt. mount 7.2
OR-XDI-JM Cross Convertor modules with JVC batt. Mount 7.2
OR-XDI-PM Cross Convertor modules with Panasonic batt. mount 7.2
OR-XDI-PV Cross Convertor modules with Panasonic batt. Mount 7.2
OR-XDI-SB Cross Convertor modules with Sony batt. Mount 14.4
OR-XDI-SL Cross Convertor modules with Sony batt. Mount 7.2
OR-XDI-SM Cross Convertor modules with Sony batt. Mount 7.2
OR-XDI Operation Manual
Marshall Electronics
Page 3 of 8
Overview
The OR-XDI is a rugged, portable, battery powered HDMI to SDI and SDI to HDMI cross converter. This
unit is designed for use with cameras that use an HDMI output to feed an external monitor while allowing
the same feed to be converted from HDMI to SDI with embedded audio, in order to deliver high definition
video and audio to camera assist, Directors, Producers and others in the video village that require a high
quality video feed. It can also be used the other way to take the 3G, HD, SD-SDI output from production
cameras to feed both the HDMI input of an external monitor while simultaneously feeding the 3G, HD,
SD-SDI to other locations and equipment. The OR-XDI can be powered via a wide variety of Marshall
Battery mounts, consumer type 12vDC EIA power adapter, or optional broadcast standard 4-pin XLR
power connection.
Features

Battery operable 7.2vDC or 14.4vDC (Marshall small battery compatible) no AB or V-Mount

Rugged Metal Alloy case

Only 3.91” long (4.96” including BNC connectors) x 2.28” wide x 1.38 high

Weighs Only 7.6 Ounces (without battery)

3G/HD/SD-SDI Input and Dual 3G/HD/SD-SDI Outputs

HDMI Input and Output

Dual size mounting holes (12 x 1/4-20 and 4 x M4)

EIA 12vDC External Power Jack

4-pin XLR 12vDC Input available as an option

HDMI to SDI, SDI to HDMI conversion including Audio

Automatic input port switching

Automatic video format detection

Built-in SD format interlacer for DSLR while recording (480p to 480i conversion)

USB service port for future upgrade

Status LEDs indicate Link speed and status.

8 position piano switch for easy configuration. (input selection, auto mode, etc.)
Setup
The OR-XDI requires 5.5vDC to 16vDC either through the supplied 12vAC power adapter, Marshall small
battery adapter (7 or 12 volt) or optional 12vDC XLR 4pin adapter. Cross conversion is automatic when
all 8 of the piano dip switches are set to the Down “Off” position.