Marshall Electronics CV350-5X - Manual (Page 9)

9
1080 HD-SDI 5X Camera
Select FOCUS CONTROL using the UP or DOWN button.
You can select ZOOM SPEED, TELE LIMIT, WIDE LIMIT, FAR END, NEAR END, LENS INITIAL
and USER PRESET using the LEFT or RIGHT button.
FOCUS CONTROL
ZOOM SPEED: Set the zoom speed from 00~07.
TELE LIMIT: Set the limit of the tele control from X3, X4, X5, X10, X15, X20,
X25, X30, X35, X40, X45, X50, X55, and X60.
MAIN MENU
WB CONTROL
AE CONTROL
FOCUS CONTROL
BACK LIGHT
IMAGE CONTROL
DISPLAY CONTROL
RESET
EXIT
ATW
INDOOR
SAVE
FOCUS CONTROL
FOCUS MODE AUTO
ZOOM SPEED 04
TELE LIMIT X5
WIDE LIMIT X1
FAR END INFINITY
NEAR END 1M
LENS INITIAL OFF
USER PRESET OFF
RETURN
WIDE LIMIT: Set the limit of the zoom control from X1, X2, X3, and X4.
00 is the slowest zoom speed set value. 07 is the fastest zoom speed set value.
FAR END: Set the limit for the far focusing from INFINITY, 2, 3, 5, and 10M.
The lens moves to adjust the focus from the distance.
NEAR END: Set the priority distance limit for near focusing from 30CM, 1, 1.5,
2, 3, 5, and 10M.
LENS INITIAL: This function repeats adjustment of the focus level at the interval.
USER PRESET: This function is used to set user defined zoom and focus position.
Up to 32 preset position can be set.
ONE PUSH: The focus setting is initialized when ONE PUSH is selected.
AUTO: The focus is initialized as DAY setting.
DAY: Select the interval DAY/DAYS from 01~07 using the LEFT or RIGHT button.
USER PRESET: Select the preset ID from 00~31 using the LEFT or RIGHT button.
ACTIVE: Activate the focus preset setting of the USER PRESET.
SAVE: Save the preset setting.
RESET: Reset the preset setting.