EV Rider MA-1212 - Manual (Page 4)

WARRANTY STATEMENT
Electro-Voice products are guaranteed against malfunction due to defects in materials or
workmanship for a specified period, as noted in the individual product-line statement(s) below,
or in the individual product data sheet or owner's manual beginning with the data of original
purchase. If such malfunction occurs during the specified period, the product will be repaired
or replaced (at our discretion) without charge. The product will be returned to the customer prepaid.
Exclusions and Limitations
The Limited Warranty does not apply to:(a) exterior finish or appearance; (b) certain specific
items described in the individual product-line statements below, or in the individual product
sheet or owner's manual; (c) malfunction resulting from use or operation of the product other
than as specified in the product data sheet or owner's manual;(d) malfunction resulting from
misuse or abuse of the product; or (e) malfunction occurring at any time after repairs have been
made to the product by anyone other than Electro-Voice Service or any of its authorized
representatives.
Obtaining Warranty Service
To obtain warranty service, a customer must deliver the product to Electro-Voice Service
or to any of its authorized service representatives, together with proof of purchase of the product
in the form of a bill of sale or receipted invoice. A list of authorized service representatives is
available from Elector-Voice Service at 12000 Portland Avenue. Burnsville, Mn55337.
Ph: (887)863-4166.
Incidental and Consequential
Damages Excluded
Product repair or replacement and return to the customer are the only remedies provided
to the customer. Electro-Voice shall not be liable for any incidental or consequential damages
including, without limitation, injury to persons or property or loss of use. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you.
Other rights
This warranty gives you specific legal rights , and you may also have other rights which vary
from state to state.
Speakers and Electronics
Electro-Voice Speakers and Speaker Systems are guaranteed against malfunction due to
defects in Materials or workmanship for a period of five (5) years from the date of original purchase.
The Limited Warranty does not apply to burned voice coils or malfunctions such as cone and/or
coil damage resulting from improperly designed enclosures. Electro-Voice active electronics
associated with the speaker systems are guaranteed for three (3) years from the date of original
purchase. Additional details are Included in the Uniform Warranty statement.
Electro Voice
12000 Portland Avenue South, Burnsville , MN 55337
Phone: 952/884-4051, Fax:952/884-0043
www.electrovoice.com
Telex Communications, Inc. 10/2001 C
MONITOR OUTPUT
0
0
10
10
0
0
10
10
0
0
10
10
0
0
10
10
0
0
10
10
0
0
10
10
INPUT2
INPUT6
INPUT3
INPUT7
INPUT4
INPUT8
AUX1
INPUT9
AUX2
INPUT10
Professional Mixer/Amplifier Professional Mixer/Amplifier MA-1212
POWER
0 10
BASS TREBLE
MASTER
+10 10 10 +10
Mute INPUT1
INPUT5
OFF ON
R
2 1 3 5 6 4
7 8 9
1. "Mute" function switch
This switch lets you turn the "Voice Priority" on or off of input 1 (1).
CONTROL AND FUNCTIONS
2. Input level controls
These controls let you individually set the volume of the sound source that are connected to
the "INPUT 1 ~ INPUT 10","AUX 1" and "AUX 2". Turning a control clockwise increases the
volume of the corresponding source. We recommend to leave the controls of momentarily not
used inputs their minimal setting "0".
3. Music signal monitor output level control
The control lets you individually set the volume of the sound output that are connected to
the "MONITOR OUTPUT" (4) and "1W/8 "(25).Turning controls clockwise increase the
volume of the corresponding source.
4. "MONITOR OUTPUT"
This allows signal output of the "AUX1","AUX2","CASSETTE" and "TUNER" input mixing. It can be
used to control an audio appliance with input impedance over 600 ohms (e.g. Earphone or an
additional amplifier etc.) The output signal is controlled only by the volume controls of the "AUX 1",
"AUX 2", "TUNER" and music signal level control (3). This function is toggle switch the "1W/8 "
(25) additional loudspeaker.
5. Indicator
When switch the amplifier's power on. The "PL" indicator lights. When the amplifier's output overload
the "OVER LOAD" indicator lights and interrupt output. For equipment life, you have to adjust the volume
at a lower setting.
6. "POWER" switch
Using the POWER switch lets you turn the main power on or off.
7. MASTER volume control
The setting of this control determines the output that is present at the loudspeaker OUTPUT. We
recommend to generally adjust the MASTER and the input level controls at mediocre positions.
extreme setting, where the MASTER is set to maximum output and the input controls nearly set to
their minimum or vice versa are not recommendable.
3 12
8.Common TREBLE-control
Clockwise this control enhances the high frequency reproduction, while turning it counter
clockwise attenuates the treble frequencies. If the control is set to its center position, the
overall frequency response is not being altered.