Escali M-Series - Manual (Page 2)

BATTERY INSTALLATION
1. Turn the entire scale upside down and reset it securely on a firm, flat surface.
2. Open the battery door by loosing the battery door screw.
3. Install four UM2 size C batteries in the battery compartment, ensuring that the
positive/negative side is in the direction as shown in the cabinet.
4. Close the battery door and fasten it with the screw.
BATTERY STATUS
• When the battery is low, “Lo” will be displayed. Open the battery compartment and
replace the old batteries with new ones.
• Used batteries must not be disposed of as household waste. Do not incinerate
batteries because they might explode at high temperature. Contact your local authority
for information concerning reclamation and disposal of batteries.
• When replacing batteries, always use brand new batteries of the same type.
AC/DC ADAPTOR (Optional)
1. Open the Adaptor cabinet door.
2. Plug the adaptor jack into the socket.
3. Take out the adaptor and close the cabinet door.
4. Plug the adaptor to the AC main.
PART AND KEY DESCRIPTION
1) Stainless Steel Platform
2) Bubble Leveler
3) Liquid Crystal Display (LCD)
4) Keypad
5) Battery
Door and Compartment
6) Main power On/off Switch
7) Adaptor door
8) AC/DC adaptor socket
9) AC/DC adaptor (optional)
10) Level adjusting feet
(6)
Main Power
On/Off Switch
(7)
Adaptor Door
(9)
AC/DC adaptor
(8)
AC/DC Adaptor
Socket
(10)
Level Adjusting
feet
(5)
Battery Door
and Compartment
Bubble
Leveler
(2)
LCD
Display
(3)
Keypad
(4)
(1)
Stainless Steel
Platform