MEDC Weatherproof ResistTel IP - Manual (Page 33)

Short Manual ResistTel IP2 / IP152 Page 33
ExResistTel IP2 / IP154
3. To terminate the enquiry call, press the key . You return to the conversation
partner previously put on hold.

Tip
The call with the conversation partner highlighted on the display (active) is
terminated by pressing the key . If you alternatively want to terminate a call with
another conversation partner, first select the respective conversation partner whose
connection you want to disconnect using the arrow keys and only then press the
key .

2.3.8
Switching
You can switch between two connections using the switch function.
Torsten 72
Peter 36
Torsten 72
Thomas 70
06.01.10 14:40 0:22
Figure 20: Switching
1. Press the key (short) two times or the key (short) followed by the key
during a call with an active line and a line on hold. The active line is put on hold
and the line on hold is activated (see Figure 20).
2. To terminate the active line, you must press the key . The connection to the
active conversation partner is terminated.
Please note also the tip in chapter 2.3.7 "Making second Call" beginning on page 32.