Using your remote control – Meliconi Speedy 110 User Manual

Page 3

Advertising
background image

6

Once you have programmed Speedy 110, you can turn ON your TV in three ways:

Press or .

Press .

Press and simultaneously: this sends the code for programme 1.

If the remote control is no longer programmed because it has been left without batteries for a long time
or has flat batteries, you can re-program it quickly as follows:

1. Hold down the

and keys simultaneously until the light indicator at the top starts to flash

indicating that the remote control is programming.

2. Release the keys and, within 12 seconds, using the and keys, enter the nine-sign code which

you noted down before. At the end, three flashes indicate that the code has been saved correctly.
If not, try the code entry procedure again from point 1.

USING YOUR REMOTE CONTROL

To return to programme 1 directly, press and simultaneously.

RE-PROGRAMMING YOUR REMOTE CONTROL BY ENTERING THE CODE NOTED DOWN

WARRANTY: 2 years
The warranty ceases to be valid if the product is tampered with or
used incorrectly.

Remote control model Speedy 110

Purchase date

PROBLEM

The TV does not respond and the light
indicator does not light up when you
press a key.

The TV or VCR does not respond but the
light indicator does light up.

The TV does not respond and the light
indicator flashes.

Not all remote control commands are
working correcting.

The and keys do not select the
programmes.

TROUBLESHOOTING

SOLUTION

Check that the batteries are fitted correctly. If necessary,
replace them with 2 new 1.5 V AAA/LR03 alkaline
batteries.

Check that the batteries are new and that the remote
control is pointing at the appliance without any obstacles
in the way. If required, reset the remote control code by
repeating the programming procedure.

Batteries are low. Replace them.

You may have used the wrong code. Reset the remote
control code, following the programming procedure.

The original remote control may not have had this
function. In this case, set the code (press 9 times) as
described in the PROGRAMMING YOUR REMOTE
CONTROL
section above.

If you have any queries about Speedy 110:

read this booklet carefully – this will help you to solve almost all problems
consult our Internet site www.meliconi.com to answer all your queries easily and quickly.

INFO-LINE

Agent's stamp

P

-

+

P

P

-

+

P

P

-

+

P

+

P

P

-

+

P

P

-

+

P

Istr SPEEDY 110+ guscio V4.qxd 12-12-2007 17:09 Pagina 6

Advertising
This manual is related to the following products: