Meliconi AD 40 Sail - Manual (Page 3)

4
If the quality of the image is poor or if no signal is received, proceed as follows to
improve reception:
- increase/decrease amplifi cation using the knob on the back of the antenna, bearing in mind
that maximum amplifi cation does not necessarily correspond to optimum signal quality. To
increase/decrease the level of amplifi cation turn the knob as shown on the symbol located
next to it.
- Change the position of the antenna.
NOTE: If the signal is too strong, to avoid image interference we suggest you
reduce the level of amplifi cation.
Improving reception
C
Troubleshooting
D
- If the antenna is not working make sure it is powered up correctly (red LED ON) and that
the adjustment knob is in the maximum gain position.
WARNINGS
- Keep away from water: the antenna must not be exposed to drips or water spray. Do not
use in a damp atmosphere.
- Only use the power supply unit supplied with the device.
- The power supply unit must be easily accessible to enable the electric separation of the
device from the network.
The product complies with the following directives:
- 2011/65/EU (RoHS II)
- 2006/95/EC, (LVD)
- 2004/108/EC (EMC)
- 2009/125/EC (ErP)
2 YEAR WARRANTY - The warranty is declared null and void if the product is tampered with
or used improperly.
FEATURES AND TECHNICAL SPECIFICATIONS
- Indoor amplifi ed digital antenna
- 230 Vac 50 Hz mains power input via an adapter included with the antenna
- 5 Vdc 50 mA power input (via antenna connection) from decoder (if decoder includes this
option)
- Reception of digital terrestrial TV signals (DVB-T) and DAB radio signals
- Reception range: VHF + UHF (174~230 470~790 MHz)
- Anti-interference fi lter 4G LTE / GSM
- Antenna amplifi cation adjustment: up to 40 dB
PACKAGE CONTENTS
- Antenna
- Instruction booklet
- AC/DC power supply unit