EchoStar Over-the-Air Module MT2 - Manual (Page 9)

Page 8
a similar name. Refer to your TV’s User Guide for help locating
this connection.
4. Using the satellite receiver’s remote control, press MENU, select
System Setup , Installation , then Modulator Setup .
Figure 3. Modulator Setup
5. Under TV1 Out, select Channel 3 or 4. Set the channel on the TV
connected to the
C H 3-4 O UT output to match this setting.
6. Select Done to save your changes.
OTA Module.book Page 8 Thursday, July 3, 2008 4:35 PM