Eltax Millennium DV-300 DivX - Manual (Page 19)

SYSTEM SETUP
18
SPDIF SETUP
OFF:
RAW:
PCM:
Here you set up the digital sound format that
comes from the co-axial or optical output on the
back panel. This signal is used when the unit is
connected to a digital surround receiver.
Closes the digital outputs.
Opens for the pure, non-modulated
digital signal.
Stands for Pulse Code Modulation. It may
be necessary to activate this function if the
digital surround receiver cannot recognise the
sound format.
AUDIO SETUP
Includes Downmix setup, SPDIF setup, Dolby
Digital setup and HDCD setup.
Here the analogue sound format is selected.
DOWNMIX
LPCM OUTPUT
Here the digital output format is selected. If
48KHz is selected, the sampling frequency will
be converted to 48KHz. If 96KHz is selected,
the sampling frequency of the digital signal will
not be converted.