Extron Electronics RGB 400xi Series - Manual (Page 9)

RGB 400xi xi xi xi xi Series Installation Guide
Installation, cont’d
10
The dashed line indicates the recommended
cut-out area (2.68”
H x 5.25”
W)
for the installation surf
ace
.
The inside solid line (3.38”
H x 5.70”
W) represents
the outside edge of the RGB 460
xi
w
all plate
.
T
emplate f
or the
MK mounting brac
ket
The outside solid line (3.5”
H x 5.83”
W) represents
the outside edge of the RGB 472
xi
w
all plate
.
MK Interface cut-out template
Figure 6 — Cut-out template