Oki MC363dn - Manual (Page 53)

Configuring the fax settings > 53
C
ONFIGURING THE FAX SETTINGS
B
ASIC SETUP
Minimum configuration requirements; a PSTN telephone line connection.
If you wish to connect an external telephone or answering machine, refer to
“Adding a
telephone handset” on page 56 .
Your MFP has to be set up properly to allow faxing from the machine. The following
parameters must be set before using the fax function:
> Date and time
> Local fax number
> Sender ID
There are other parameters that can be adjusted to suit your personal preferences later if
required, refer to fax set up table for details (See “Advanced set up” on page 54 ).
To set fax parameters:
1.
Press the SETTING button on the control panel.
2. Using the Down arrow key, scroll to Easy Setup and press OK.
3. Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight Enter and press OK.
4. Press the Right arrow key to select Date/Time Setting.
5. Using the arrow keys, select the correct time zone and press OK.
6. Using the arrow keys, select the correct daylight saving option and press OK.
7. Press OK to select Manual.
8. Using the arrow keys, enter today’s date.
9. Press OK.
10. Using the arrow keys, enter the correct time.
11. Press OK.
12. Using the Down arrow key and scroll to Fax Setting then press Right arrow key.
13. Press the Right arrow key to select Fax Number.
14. Using the keypad and on screen options enter the fax number for this MFP.
15. Highlight Enter and press OK.
NOTE
If you ran the Oki driver installer program from the DVD-ROM you may have
already set the time zone, date and time via the Panel Language Setup utility.
NOTE
The default password is “999999”.
NOTE
Use the Right and Left arrow keys to move between digits.
NOTE
Use the Right and Left arrow keys to move between digits.