Precision Digital PD6080 - Manual (Page 74)

PD6080/PD6081 Super Snooper Modbus Scanner Instruction Manual
74
Scan Function (SCan)
The Scan menu is used to program the PV scan mode and the scanner’s behavior on alarm condition.
The operator is able to scan automatically based on a time parameter, or scan manually with front panel
keys or digital inputs. The operator is also able to set the scanner to stop on alarm or continue scanning
on alarm. To resume scanning the operator must press the Next or Previous button. Please follow the
menu below for details. In the Stop on Alarm mode, the scanner will go to the alarmed PV and remain
there until the operator manually advances to the next PV or returns to the previous PV. If a new alarm is
detected the process is repeated. The scanner ignores old alarms.
Continues
to
Control Menu.