Precision Flight USB CAT II and Microsoft Flight Simulator X - Manual (Page 8)

Calibrating the Cirrus II Power Quadrant for use with FSX
NOTE: When doing calibration it is preferred that you use a twin aircraft quadrant, see picture below. The
numbering of the levers 1 to six is based on the twin quadrant.
1. You will now calibrate the power quadrant in the Windows® Game Controller Screen. Please make
sure that you have a twin lever installed on the console before calibrating. If you do not have a
twin lever, you may remove the lever and push the rods instead. You will calibrate all six positions.
2. Click on Start on the Windows® Taskbar and then select Control Panel.
3. In the Control Panel list, select Printers and other Hardware, then double-click the Game Controllers
icon.