Primare I22 integrated amplifier - Manual (Page 5)

i 2 2 u s e r g u i d e

using the remote control
F i t t i n g t h e b a t t e r i e s
Before using the remote control you need to insert
the two button cells supplied with the C24.
• Open the cover on the back of the remote
control by pressing the tab gently:
• Insert the two batteries, positive side uppermost:
+
CR2025 LITHIUM BA
TTERY 3V
+
CR2025
LITHIUM BA
TTER
Y
3V
• Replace the cover and push until it clips into place.
 Note: Replace only with 3V button cells
type CR2025 or equivalent.
When disposing of old batteries please be considerate
to the environment.
Switch on/off
Increase the volume, or
change item on settings menu
Select next input or
move up on settings menu
Select previous input or
move down on settings menu
Control the CD player
Change the balance
Change the display brightness
Mute the sound
Display the settings menu
Decrease the volume, or
change item on settings menu
Decrease the volume
Increase the volume
Select I22 mode
Select an input
(5 to 7 with optional DAC board)
This page explains how to use the C24 remote control to
operate the I22, and how to fit the batteries into the remote
control.