Primare DAC30 high resolution DAC - Manual (Page 5)

d A C 3 0 u s e r g u i d e

Switch on/off
Select next input
Select previous input
Control the CD player
Blank the front-panel indicators
Decrease the volume
Increase the volume
Select DAC30 mode
Select an input
using the remote Control
f i t t i n g t h e B A t t e r i e s
Before using the remote control you need to insert
the two button cells supplied with the C24.
• Open the cover on the back of the remote
control by pressing the tab gently:
• Insert the two batteries, positive side uppermost:
+
CR2025 LITHIUM BA
TTERY 3V
+
CR2025
LITHIUM BA
TTER
Y
3V
• Replace the cover and push until it clips into place.
 Note: Replace only with 3V button cells
type CR2025 or equivalent.
When disposing of old batteries please be considerate
to the environment.
This page explains how to use the C24 remote control to
operate the DAC30, and how to fit the batteries into the
remote control.