RISCO Group axesplus®, iREX - Manual

with the IQ feature
INSTALLATION INSTRUCTIONS
DESCRIPTION
iREX and iREX Plus are PIR detectors specifically designed for request-to-exit (REX) and request-to-enter (REN) applications.
The iREX detectors are designed with the IQ feature (Intelligent Queuing) used to remotely enable or disable the iREX.
The iREX detectors can be installed as stand alone units or in conjunction with Access Control systems.
The iREX can be mounted on both walls and ceilings and are designed with flexible adjustment to cover the specific needs of each secured area.
1. INSTALLATION
IMPORTANT:
The iREX should always be installed with the rounded
side of the detector pointing to your left side when you
are facing the iREX.
iREX Components:
1
2
Adjusting Buzzer Volume:
Masking:
To insert a masking wedge: To remove a masking wedge:
Masking Coverage:
2. MOUNTING AND DETECTION
Ceiling Mounting 4.6m
Position 0
Wall Mounting 4.6m
Position 0
Ceiling Mounting 2.3m
Position 0
Wall Mounting 2.3m
Position 0
0
C C
4.7m
15.4ft
Wall Wall Door
X
X X X X
Wall
1.2m
3.9ft
1m
2m
0m
(0ft)
(3.3ft)
(6.6ft)
3m
(9.9ft)
4m
(13.2ft)
4.6m
(15ft)
Front View
Top View
Side View
Wall Mounting 2.3m
Position A
Wall Mounting 2.3m
Position B
A
B
2.4m
7.9ft
Wall
Door
1m
2m
2.3m
0m
(0ft)
(3.3ft)
(6.6ft)
(7.5ft)
Side View
NOTE:
Do not mount the detector in direct
sunlight or near heated sources and
metal objects.