EdgeStar AP310SS - Manual (Page 12)

4)
UP
or
DOWN
: Temperature / Time Buttons
These buttons are used to adjust the thermostat setting up or down, or to adjust the time
setting when using the timer.
NOTE: The temperature can be displayed in Celsius or Fahrenheit. To change from
one scale to another, press and hold the On/Off button for 20 seconds.
5)
TIMER
: Timer Button
Used to set or cancel the timer. The timer has two functions. When the unit is off, the
“On Timer” can be used to turn the unit on after a set time. When the unit is on, the
“Off Timer” can be used to turn the unit off after a set time.
How to set the Off Timer:
When the unit is on, press the Timer button. “3” will flash in the timer display and the
timer indicator will light up. Press the “
UP
” or “
DOWN
” buttons while the number
is flashing to select the time delay. You may set the unit to turn off in as little as 1 hour
or as much as 24 hours, in 1 hour increments. 10 seconds after you last press the
Temperature / Time buttons, the timer display will stop flashing.
As time passes, the time in the timer display will decrease in 1 hour increments. When
the timer display reaches 0, the unit will turn off.
How to set the On Timer:
When the unit is off (but plugged in), press the Timer button. “3” will flash in the timer
display and the timer indicator will light up. Press the “
UP
” or “
DOWN
” buttons
while the number is flashing to select the time delay. You may set the unit to turn on in
as little as 1 hour or as much as 24 hours, in 1 hour increments. The unit will start up
using the last settings it was on when it was turned off.
As time passes, the time in the timer display will decrease in 1 hour increments. When
the timer display reaches 0, the unit will turn on.
How to alter the time on the timer after it has been set:
When the timer is set (in either mode), press the timer button again. The time in the
timer display will begin to blink. While it is blinking, you can adjust the time using the
Temperature / Time buttons. 10 seconds after you last press the Temperature / Time
buttons, the timer display will stop flashing.
How to cancel the timer:
11
When the timer is set (in either mode), press the timer button again. The time in the