RISCO Group Orbit Pro RP-296 - Manual (Page 13)

user manual
5
ARM LED
CONDITION EXPLANATION
ON The system's intrusion detectors are
armed; subsequent violations of a
protected point or area (e.g. a door,
a window, unauthorized motion) will
result in a burglar alarm
OFF The intrusion function of the system
is disarmed
SLOW
FLASH
(About once
every 2 sec.)
indicates the system is in its
Exit Delay period
The ARM LED
indicates whether or
not the system's
intrusion detectors
are armed.
RAPID
FLASH
(about 4 times
per second)
Indicates alarm condition, and
occurs after disarming alarmed
system during the display in alarm
memory mode. To restore the
display to normal, press
READY LED
CONDITION EXPLANATION
ON All intrusion zones are secure; the
system is ready to be armed
OFF One or more intrusion zones are not
secure and the system is not ready
to be armed; before the system can
be armed, the condition must be
addressed
The READY LED
indicates whether or
not the system's
intrusion zones are
secured and ready
to be armed.
SLOW
FLASH
(About once
every sec.)
Indicates the system is ready to be
armed while a specially designated
entry/exit door remains open, and
when a forced arm zone is open.