RISCO Group Upload/Download software - Manual (Page 39)

Chapter 5: Main Menu Bar Options
Page 36
Reports codes: 3. Report Codes
From the main menu select
Installer>Report codes and one
of these options:
Update report
codes:
See ProSYS table above.
5.3.5 Orbit-14 Installer Menu Options
System parameters: 1. System
From the main menu select
Installer>System and one of
these options:
System codes:
See ProSYS table above.
2. Zone Parameters
From the main menu select
Installer>Zone Parameters
For setting a list of zones, labels, their partition, type,
sound etc.
3. Utility Outputs
For setting the Utility outputs in
the system, from the main menu
select Installer>Utility Outputs.
See ProSYS table above.
Reports codes: 3. Report Codes
From the main menu select
Installer>Report codes and one
of these options:
Update report
codes:
See ProSYS table above.
5.4 Access Control Menu
(for ProSYS only)
The Access Control menu is used to define all parameters that relate to access entry, such as: doors, time
definitions, readers, card holders, reports etc. For more information refer to the panelʹs installer manual
and the Access Control Module manual.