Retrotec DM32 User Manual
Page 14
Advertising
Page 14 of 15
©Retrotec Inc. 2013
Figure 17: A simulated gauge is started and connected and is shown outlined in red on the virtual gauge screen
Two simulation options appear in the “Simulation Settings” section, the Virtual PrA and Virtual PrB.
Enter numeric values in these data entry boxes to have the values appear on the Simulated Gauge.
To stop the Virtual Gauge simulation, click on [Stop Gauge Simulator] and the ”Simulator” gauge is
removed from the list, and the screen goes back to being ready to connect to a real gauge.
Advertising