Retrotec Leakage Split Kit - Manual (Page 2)

QG220 Page 2 of 4 rev-2008-04-07
Step 1: Remove the Ceiling Tile
Remove the ceiling tile closest to the
door opening where your fan is installed.
Ideally, the tile you remove will be
slightly to the left or right of the door
opening to avoid obstructing air flow to
the fan.
Step 2: Unpack and Attach the Flex Duct to the Ceiling
Unpack the Flex Duct from its
case. Position the Flex Duct case
directly below the ceiling tile
opening with the Flange end face
up.
Your Flex Duct is designed to fit a
standard two-foot square ceiling
tile opening. Insert the Flex Duct
flange into the T-bar ceiling
framework to occupy one half of
the opening.