Retrotec Speed Control Adapter (for TEC fans) - Manual (Page 4)

Page 4 of 10
©Retrotec Inc. 2014
2. What’s included
The Adapter kit comes with both connectors needed – a short yellow Ethernet-style Speed Control
Cable, and a short black cable with 3.5 mm audio connectors. The Speed Control Cable connects to the
Speed Control output on the top of the Retrotec gauge, and the black connector goes from the Adapter
to the Minneapolis Fan Speed Control Cruise input port.
The DM32 comes with a Tubing Accessory kit, so users will have the Retrotec color coded pressure
tubes.
Connecting the pressure ports to the TEC fan as described in this document will allow the Retrotec
gauge to correctly calculate results, and allow the user to follow the testing procedures shown in the
Retrotec QuickGuides.