RIGOL DSA875 - Manual (Page 2)

RM-DSA800 Installation Guide RIGOL
3
2. Install the front panel: let the screw holes fit well together and fix them with six M4
screws.
3. Place and fix the instrument: place the instrument into the confined position on the
support board. Aiming the instrument front panel at the opening of the front panel of
the rackmount kit and fix the instrument with four spring washers, four washers, two
retaining brackets and four M4 screws.
RM-DSA800 Installation Guide RIGOL
4
4. Load into the machine cabinet: mount the rack with instrument fixed into a standard
19-inch machine cabinet using four M6 screws and square nuts.
Installation Cautions
The rack holds a height of 5U (1U=44.45 mm), and the holes pointed out by the arrows are
the mounting holes for the rack which should be aligned when installing.
5U