Rro o, O op pe erra attiio on n – ROCKINGER RO 841 B User Manual

Page 4

Advertising
background image

2

2.. O

Op

pe

erra

attiio

on

n

R

RO

O

i

i

8

84

41

1 B

B

ROCKI NG E R

Member of JOST-World

13

GB

2.1 Hitching

x Place the drawbar eye at the height of the coupling point
x Press the hand lever upwards until it engages
x Release the brakes on the on the front axle of the articulated

drawbar trailer

x When connecting with a rigid drawbar coupling, the drawbar eye

must be as close to the centre of the funnel as possible:
Failure to observe this can lead to damage!

x Reverse the tractor vehicle slowly

Inspection: ATTENTION:

After each hitching operation you must

check that the coupling is in the hitching condition in accordance with
the regulations.
After hitching, the control pin must
not project out of the control sleeve.
Projecting control pin: incorrectly hitched,
risk of accident!

You may not drive with the trailer in this condition.

(see Fig. 1)

Remedy:

– stretch coupling (drive approx. 1 metre forwards, then

backwards)

– then check again.

2.2 Unhitching

x Secure the trailer against rolling away or extend support feet.
x Open the coupling.
x Move the tractor vehicle forwards.
x For tow rope: lift the coupling using a suitable aid (e.g. tyre lever)

Note: During operation without a trailer, close the coupling to
protect the lower sleeve against dirt.

Caution: Do not reach into the funnel

O.K.

1

2. Operation

The legal stipulations must be observed for hitching and unhitching.

Advertising