Ecom Instruments Ex-GSM 01 - Manual (Page 15)

14
5 – Slide the upper shell onto the phone.
6 – Slide the lower shell onto the phone until
it clicks into place, meeting the upper
shell.
10.1.6 Attaching the carrying strap to the phone
1 – Connect the elastic band to the holster.
2 – Connect the pins on the end of the hol-
ster to the holes in the lower end of the
phone.
3 – Connect the pin on the other end of the
holster to the hole in the top end of the
phone.
4 – Wrap the elastic band, for example,
around your wrist and connect the band
to the holster.
5 – Connect the hook to the loop on the
elastic band. The hook contains a
magnifying glass and a whistle.
10.2 Standby mode
When the phone is ready for use, and you have not keyed in any characters,
the phone is in standby mode.