Rose Electronics CrystalView DVI Micro DL - Manual (Page 6)

WWW.ROSE.COM [email protected] (800) 333 9343
Rose USA (281) 933 7673 Rose Europe +49 (0) 2454 969442 Rose Asia +65 6324 2322
Rose Australia +61 (0) 421 247083
Rose Electronics 10707 Stancliff Road Houston, Texas 77099
Troubleshooting
a) No display on the DVI monitor
- Check if the PC power is on.
- Check if connection to the computer and the monitor are correct.
- Turn the PC power off and on again.
b) Noise is shown on the screen.
- Check the DVI connection.
- Check the display resolution.
- If the malfunction is not fixed by the above measures,
please contact technical support
Technical Support
If you are experiencing problems, or need assistance in setting up, configuring or operating your
CrystalView DVI Micro/DL, consult the troubleshooting section of this manual. If, however, you
require additional information or assistance, please contact the Rose Electronics Technical
Support Department at:
Phone: (281) 933-7673
E-Mail: [email protected]
Web: www.rose.com
Technical Support hours are from: 8:00 am to 6:00 pm CST (USA), Monday through Friday.