Rose Electronics RackView - Manual (Page 6)

Page 4 KVM Rack Drawer 17” and 19” WWW.ROSE.COM
Pre-Installation and Package Contents
Before Installation:
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the mounting location has good ventilation, is out of direct sunlight, and away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
Unpacking:
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact your supplier immediately.
Package Contents:
1x Rackview Unit
1x Mounting Bracket set
1x Combo Cable for Video/Keyboard/Mouse (VGA/USB)
1x Power Cord
1x User Manual
1x set of screws and washers for assembly
Product Operation:
a) Power On Procedure
• Power on the Rackview (see power switch on back panel)
• Power on the KVM Switch or other connected product
• Power on the CPU
b) Video Input Select Button (see OSD Section, Page 10)
The Rackview remembers the last valid video input selection, so if the CPU input has changed, the user
needs to re-select the video input.
• Locate the “Video Input Select” button on the OSD display control panel
• Push the Video Input Select button to toggle between VGA and DVI Input
• Select the appropriate Video Input format (VGA or DVI)