Rose Electronics RackView Dual Rail - Manual (Page 9)

Page 9 KVM Rack Drawer Dual Rail 15”-17”-19” WWW.ROSE.COM
Install the front bracket and fix using cabinet screws.
4. For a rack depth above 535mm (21.06”) with Rackview 15” and 17”, and for a rack depth
above 595mm (23.42”) with the Rackview 19”.
Remove the screws from the long assembled bracket.
Slide the long bracket into the existing rails and fix with 5 cap screws (each side).
Combine (I) and (II) together and fix with 7 cap screws.
Release the thumb screw from the front bracket and install the front bracket using cabinet screws.
Combine (I), (II) and (III) together and install the rear bracket using cabinet screws.