Eton Sound 102 - Manual (Page 11)

mit the correct local time, and the clock will need to be set manually.
The clock is displayed and entered in the 24 hour format.
To set the clock manually, you need to turn the CLOCK SETTING to
the ON state, and set the time, using the following procedure:
1. Press and hold the DISPLAY button on the remote or on the set
until MANUAL TUNE is displayed.
2. Press DISPLAY quickly. CLOCK SETTING is displayed.
3. Press/release ENTER/ to confirm. OFF flashes on the display.
4. Press the TUNE – or TUNE + buttons to change the display to ON.
5. Press/release the ENTER/ button. The hour flashes.
6. Press the TUNE – or TUNE + buttons to adjust the hour to the
correct time.
7. Press/release the ENTER/ button. The minutes flash.
8. Press the TUNE buttons to adjust the minutes to the correct time.
9. Press/release the ENTER/ button.
To turn the clock setting back to automatic mode:
1. Press and hold the DISPLAY button on the remote or on the set
until MANUAL TUNE is displayed.
2. Press DISPLAY quickly. CLOCK SETTING is displayed.
3. Press/release ENTER/ to confirm. ON flashes on the display.
4. Press the TUNE – or TUNE + buttons to change the display to
OFF.
5. Press/release the enter button 3 times to return to normal
operation.
9
SETTING THE CLOCK continued
SOUND 102 OWNER’S MANUAL SOUND 102 OWNER’S MANUAL