User/job account, User/job account -17, Ram disk setting – TA Triumph-Adler P-C3560DN User Manual
Page 151: A ram disk can be created and its size can be set
8-17
Setup and Registration (System Menu) > System Menu
RAM Disk Setting
[Menu] key > [▲] [▼] key > [Device Common] > [OK] key > [▲] [▼] key > [RAM Disk Setting] > [OK] key
User/Job Account
[Menu] key > [▲] [▼] key > [User/Job Account] > [OK] key
Configure settings related to machine management.
Overview of User Login Administration (page 9-2)
Overview of Job Accounting (page 9-13)
FormFeed TimeOut
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed. When the
preset timeout passes, the machine automatically prints paper. The options are between 5 and
495 seconds.
Value
: 5 to 495 seconds (in 5 second increments)
Ping Timeout
Set the time until timeout occurs when [Ping] is executed in "Network".
Value
: 1 to 30 seconds (in 1 second increments)
*1 Displayed only when the optional Card Authentication Kit is activated.
NOTE
This function will not be displayed when the optional SSD is installed.
Item
Description
RAM Disk Setting
A RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Mode: Off, On
RAM Disk Size: The setting range varies depending on the amount of memory installed
and the option memory usage setting.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item
Description