TA Triumph-Adler FAX 970 - Manual (Page 60)

Operation
5-5
Operation
Set
ting
s
Quick usage
Directory
M
a
intenance
Safety
Contents
Installation
Date en cours : 6 décembre 2000
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23260964-8 36xx Sagem GB\Utilisation.fm
'HOD\HGWUDQVPLVVLRQ
This function allows you to transmit a document at a different time.
To program a postponed transmission you need to identify the subscriber number, transmission
time, feeder type and number of pages.
To delay the transmission time of your document :
+
Position the document (refer to paragraph Positioning the document, page 5/1),
+
select M ENU 31 -S END / T RANSMISSION ,
+
enter the subscriber number you wish to program at a different time or choose your dialling
mode (refer to paragraph Dialling, page 5/3) and validate with
O K ,
+
next to the current time, enter the new time and validate with O K ,
+
Adjust the contrast and confirm by pressing the O K key.
+
select the feed type, F EEDER
or M EMORY
and validate with O K (refer to paragraph
Document feed types, page 3/4),
+
you may enter the number of pages before transmission and validate with O K ,
+
validate postponed transmission by pressing key .
Your document is stored and will be sent at the new time.
7UDQVPLVVLRQZLWKGLDOOLQJIROORZXS
This function allows you to hear, thanks to the machine speaker, the dialling operation during a
fax transmission. In that case, the maximum transmission rate will be 14400 bps.
This function allows for example:
• to hear if the subscriber’s fax is engaged and so, choose the moment when the line is clear to
launch the document transmission,
• to control the communication progress in case of uncertain numbers, etc.
To take the phone line manually:
+
Place the document in the fax feeder.
+
Press
1
.
+
If necessary, set the sound level with navigator
5 or 6 keys.
+
If not already done, enter the subscriber number (or refer to paragraph From the redial
key, page 5/4 to call back the last subscriber).
As soon as you hear the remote fax tone, the line is clear and you can launch the transmission.
+
Press to launch the document transmission.
If your machine is set in order to print a transmission report (refer to paragraph Main settings,
page 3/1), for this one, the reduced copy of the document first page will not be printed and it
notifies you that the communication is manual.
1. To call back one of the last ten subscribers, press before pressing this key.
LIAISSE 23260966-9.book Page 5 Mercredi, 6. décembre 2000 5:45 17