Euphonix EuCon - Manual (Page 21)

professional control surface
Artist Series
USER GUIDE
COMMON TASKS
21
Chapter 3: Common Tasks
If you completed the steps in Chapter 2: Setup and Installation, you are ready to
start learning about your MC Mix. We recommend performing these simple tutorials
of common tasks in the order presented.
Fader Strip
1. Press the MC Mix’s strip 1 fader SEL key (Figure 3-1).
The corresponding track is selected in your application.
2. Move the MC Mix’s strip 1 fader up and down.
You are now controlling the level of your application’s first track with your
MC Mix. The display at the top of strip 1 shows track information.
Figure 3-1 Strip 1 fader SEL key
3. When the MC Mix is first powered up, the PAN key is lit by default. If it is not
press the PAN key (Figure 3-1).
Each strip’s Soft Knob now controls pan for its application’s corresponding
track.
INSERTS
INPUT
CHAN
FLIP
EQ
DYN
AUX
GROUP
PAN
MIX
CFG
PAGE
CFG
PAGE
AUTO
REC N
ASSIGN
SEL Y
12
60
40
6
0
5
10
20
30
8
SOLO ON
fader
SEL key
PAN
key