Electrolux HD 8760 - Manual (Page 17)

17
1
2
3
4
12
14
13
13
10a
10b
11
Fig. 12
Extractor version
Filter version
Fig. 13
• HD 8795 only: Fix the
sides of the cooker
hood by fastening the
pins (10a) to the sides
of the fastening screws
(10b).
Block the sides sliding
the two tabs outwards
(11).
• Make electrical
connection (12), but
leave the hood
disconnected from the
home general electric
panel.
• In the case that it is
decided to use the cooker hood in the extraction version, then fix
one of the two flanges provided in the exit hole (13 – extraction).
Attention! The tall flange should be used when a telescopic
chimney is required to be mounted (this item should be ordered –
see special accessories), the short flange is to be used in all other
cases.
• Remount the grease filter and the front panels noting the numbering
on the back of each screen (from 1 to 4, top to bottom).
• Connect the hood to the mains supply and check the functions are
working correctly.