TOPICA TP-S1016DR - Manual (Page 18)

MENU
6.3 SEQUENCE SETTING MENU
SEQUENCE SETTING MENU
CH OP DWELL
1 ON 03 SECS
2 ON 03 SECS
3 ON 03 SECS
4 ON 03 SECS
5 ON 03 SECS
6 ON 03 SECS
7 ON 03 SECS
8 ON 03 SECS
9 ON 03 SECS
(10 ON 03 SECS)
(11 ON 03 SECS)
(12 ON 03 SECS)
(13 ON 03 SECS)
(14 ON 03 SECS)
(15 ON 03 SECS)
(16 ON 03 SECS)
Columns in brackets () only valid forTP-S1016DR
In the SEQUENCE SETTING MENU, we define for MAIN Monitor
(1) CH (Channel): Input channels. 1~9 forTP-S109DR, 1~16 forTP-S1016DR.
(2) OP (Operation): ON includes the camera in the sequence, OFF skips the camera in the
sequence.
(3) DWELL (DWELL TIME) : Dwell Time is individual adjustable for each channel. The dwelling
time for the sequencer can be set between 0-99 seconds.
Note: Sequences for Call monitors are defined in MATRIX menu.
Turn the JOG dial clockwise or counter-clockwise to select the options.
Press MENU key to return to Main Menu, press again to leave Set up Menu.
MENU
Press ENTER key to confirm the option and move to next column.
ENTER
13