Epson PhotoPC 3100Z User Manual
Page 18
14
This example shows how
the LCD screen looks in
Program user mode. The
screen looks different in
Manual or Full Auto mode.
(See “Using the LCD
SETUP and View Screens” to change the user mode.)
NOTE
If the camera is idle for more than the designated power off
interval, it turns off automatically. To turn it back on, press the
shutter button, or turn the camera off and then back on.
3
Make any changes you want to the settings on the
View menu. You can also use the camera’s control
buttons to change image quality, flash, or other basic
settings. (See page 4 for a description of basic camera
settings.)
4
Push the
T
(telephoto) button to zoom in on your
subject, or the
W
(wide angle) button to zoom out.
You see a display with green zoom steps and the
current zoom position in yellow.
TXLFNUHIVHWERRN 3DJH 7XHVGD\ 0D\ 30