Subaru Robin EH72 LP/NG - Manual (Page 19)

19
Is there a strong spark across the
electrode?
1. Remove the spark plug and connect it to the
plug
cap.
Turn key switch to START position while
grounding the spark plug against engine
body.
2. Try with a new spark plug if the spark is
weak or there is no spark.
3. The ignition system is faulty if there is no
spark with a new spark plug. Take your
engine to your nearest Subaru dealer.
Is your battery will charged?
Check the battery, it may be discharged and
unable to operate the electric starter.
Consult your nearest dealer or service shop.
Wipe off spilled fuel carefully before
checking the spark plug. Place
spark plug as far away from spark
plug hole as possilbe. Do not hold
spark plug by hand while checking.
WARNING
▲
!